+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Galley, Machinery, Work Shop/Pilot Berth Space:
_________________________________________________________________________
The galley, machinery, work shop/pilot berth space is immediately in
front of the head compartment between bulkheads 3 & 4.
Bulkheads 3 & 4 are full bulkheads, 120" apart that extend fully
athwartship.
This space is directly amidships and is almost 16 ft wide.
A workshop/pilot berth on the starboard side and a pullman style
galley located to port are planned.
The center section, located directly above the keel, is reserved for
the engine power train complete with a hydraulic pump operating from a
front PTO to power various hydraulic loads including windlass, bow
thruster, etc.
There are a total of 5 partial floors that form 6 compartments between
bulkheads 3 & 4.
It was decided to use ALL of this space, both port and starboard, to
form 12 individual fuel tanks (6/side). (See THE TANKS)
Turning an unused raw bilge space into finished tankage, eliminates
spaces under the sole that are difficult to gain access to, thus are
difficult to clean.
Back to The TOUR
LewsSailBoat@Gmail.com